Coaxial PUR-SPK 2 x 2.5mm² (50150) speaker cable with Polyuretane Jacket
Loudspeaker cables are transporting very high levels. In an ideal situation we want to have the lowest possible resistance between amplifier and speaker. In order to get closest to this figure, one should accommodate as much copper to the connector as possible to minimize the energy loss and the possible change of the sound performance of your system. Using a cable with a too small diameter can result the copper to transport the energy to its saturation, which will first decrease the level of high frequencies (cable gets warm or even hot) and affect your sound level and quality. Gotham currently offers different speaker cable types which can be combined as single line, stereo line or Biphase lines and/or put together for lower resistance. All PUR Gotham speaker cables are protected with ultra strong oil, heat and cold resistant polyurethan (PUR) jacket . The double layer copper strands for the outside line are built to keep a good flexibility and the stronger stranding of the center conductor (line) will keep the unwanted memory (bendings) to the minimum. Conductor 1 A&B and conductor 2 = 2x2,5mm2. Conductors 1A&B are not considered shields! Perfect SPK cable for up to 1650 Watts per line..png)
Construction 結構: |
||
| 1 = Jacket 外層: | PUR, Ø 6.8mm, blue (dark) RAL5013 | |
| 2 = Separation 分離層: |
PVC, Ø 6.1mm, white | |
| 3 = Conductor 1A 導體1A: | Bare copper wires 25 x 0.25 | |
| 4 = Conductor 1B 導體1B: | Bare copper wires (0.20mm) 25 x 0.25 = 1A & 1B = total 2.5 mm² | |
| 5 = Insulation 絕緣體: |
PVC, Ø 4.0mm, red | |
| 6 = Conductor 2 導體2: |
(OFC) Stranded bare copper wires 多股絞合裸銅線 50 x 0.25mm (2.50mm²) 50x30AWG = 13AWG | |
Technical Datas 特性: |
||
| Center conductor resistance 導體電阻值: |
< 7.6 ohm/km | |
| Outside line resistance: | < 7.6 Ohm/km | |
| Capacitance 電容值: |
cond/cond 導體/電導率: | < 98 nF/km |
| Test voltage 測試電壓: |
cond/cond 導體/導電: | 800 veff |
| Insulation resistance 絶緣層電阻值: | cond/shield 導體/屏蔽: | > 200 MOhm/km |
| Temperature range 温度範圍: | flexi-installed 彈性: | -5° to +50° C |
| fix-installed 固定: | -30° to +70° C | |
| Maximum Watts load: | @ current 15.0 Ampere/Line | < 1650 Watt |
Ordering Information 訂單資料:
|
Order No.
訂單號 |
Type
類型 |
Diameter直徑
|
Colour
顏色 |
Spool Size
線軸 |
Weight/
Spool 軸重 |
Shipping
Unit 運輸單位 |
| 50150 | PUR-SPK 2 x 2.5mm² |
6.8 mm | blue | 200m | 18.30 kg | 1 x 200m HS-300 |
How to solder/assemble to banana plugs
.
Please inquire via contact and avoid entering all data's. You can also simply send us an email to info@gothamasia.com如有查詢, 歡迎電郵件至 info@gothamasia.com No minimum order! 無最低訂購量！
| Instagram QR Code | 微信 We Chat QR Code |
 |
 |
